We have spent around 49 hours to find the right option for you and based on our research GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity is our top pick for you. This is one of the best products currently available in the market. However, if you don’t want to spend extra then we have another great option for you is GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity. Below is a review of some of the best gps module, together with their specifications and functions. So without further waiting, Let’s dive right in.
Best gps module
Buy Now
Buy Now
Buy Now
Buy Now
Buy Now
Buy Now
Buy Now
Buy Now
Buy Now
GPS Module GPS NEO-6M(Ar duino GPS, Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
GPS Module GPS NEO-6M(Ar duino GPS, Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
Features
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
$20.98 in stock
Features
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps
- What you will get: 1 X BN-180 GPS Module
BN-880 GPS Module Active Antenna NMEA-0183 Flight Control with Flash Compass HMC5883L AMP2.6/Pix4/Pixhawk Support GPS Glonass Beidou Car Navigation
BN-880 GPS Module Active Antenna NMEA-0183 Flight Control with Flash Compass HMC5883L AMP2.6/Pix4/Pixhawk Support GPS Glonass Beidou Car Navigation
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Features
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
BN-880 GPS Module U8 with Flash HMC5883 Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller Geekstory
BN-880 GPS Module U8 with Flash HMC5883 Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller Geekstory
Features
- BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
Matek GPS Module,SAM-M8Q Mini FPV GPS Module, GLONASS Galileo for UAV System Robots RC FPV …
Matek GPS Module,SAM-M8Q Mini FPV GPS Module, GLONASS Galileo for UAV System Robots RC FPV …
Features
- 72-channel M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C
- On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking
- Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity
- Build-in embedded GNSS patch antenna, low power consumption
- The 15x15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design.
BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory
BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory
$21.98 in stock
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us
Adafruit Ultimate GPS Breakout – 66 channel w/10 Hz updates [ADA746]
![Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [ADA746]](https://m.media-amazon.com/images/I/51EgSaFWTjL._SL500_.jpg)
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [ADA746]
Features
- -165 dBm sensitivity, 10 Hz updates, 66 channels
- 5V friendly design and only 20mA current draw
- Internal patch antenna + u.FL connector for external active antenna
- Built-in datalogging
- Perfect for Raspberry Pi, Arduino and more!
Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer
Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer
Features
- 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use.
- 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna.
- 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability.
- 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer.
NIDICI BN-880 Flight Control GPS Module Dual Module Compass with Cable for RC Drone FPV Racing
NIDICI BN-880 Flight Control GPS Module Dual Module Compass with Cable for RC Drone FPV Racing
Features
| Is Adult Product |
In this article, we have reviewed the best gps module for our readers. We hope you get the perfect gps module from our above list. If you didn’t find your desired one then check out BN-880 GPS Module Active Antenna NMEA-0183 Flight Control with Flash Compass HMC5883L AMP2.6/Pix4/Pixhawk Support GPS Glonass Beidou Car Navigation, one of the most sold items in the market.
