Hello there! Are you tired searching for the best table saw under 400 but could not able to find the right one? Worry not readers, because in this article, we have covered everything you need to know before buying the table saw under 400 online. Keep Reading!
Choosing the best table saw under 400 can be a tough job, especially when you are looking for one that suits your budget. Therefore, we have listed the top 10 table saw under 400 available at best prices with all the latest demanding features catering to your needs. We have analysed each and every product and have shared detailed information about them. Based on our personal review, we found this DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451) best in our list. However, if you are looking for a product with a cheaper price, then you can check out Metabo HPT C10FCGS Compound Miter Saw, 10-Inch, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10″ 24T TCT Miter Saw Blade which is equally good with good reviews. We are very much sure that you’ll be able to make a wiser decision in buying the Top table saw under 400 by going through the exclusive list mentioned below.
All the products listed in this guide are good in their own way. You simply have to pick one that you feel delivers on the best performance. Let us get right into them already. Check the quick reviews below.
Best table saw under 400
Buy Now
Buy Now
Buy Now
Buy Now
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)
DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)
$397.10 in stock
1 used from $377.55
Features
- Included Components: (1) Dwe7485 8-1/4 In. Table Saw; (1) Fence; (1) Anti-Kickback Pawls; (1) Miter Gauge; (1) Push Stick; (1) 24T 8-1/4 In. Blade; (1) Non-Thru Cut Riving Knife; (2) Blade Change Wrenches; (1) Modular Guard System
DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)
DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)
2 used from $176.42
Features
- Lightweight design (33lbs) delivers 20% less weight to carry than other competitive mobile stands
- Heavy-duty kickstand allows the stand to balance upright for mobility and storage
- Quick-connect stand brackets attach to saw for easy detachment from stand for loading and unloading
- Wide stand base and offset rear legs provide stability and support for material feed control
- Folding legs with quick-release levers collapse under the stand, minimizing overall size for transport
DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451)
DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451)
2 used from $34.39
Features
- Heavy-Duty tube steel construction provides the strength you need for safe operation
- Upport bar hardware holes for secure fastening of saw to the stand
- Lightweight; folds flat for easy handling, storage, and transport
- Designed for use with the DW7480 compact job site table saw, Dcs7485 60V table saw and DW745 compact table saw
Metabo HPT C10FCGS Compound Miter Saw, 10-Inch, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10″ 24T TCT Miter Saw Blade
Metabo HPT C10FCGS Compound Miter Saw, 10-Inch, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10" 24T TCT Miter Saw Blade
Features
- LARGE TABLE SAW 10 INCH : Metabo HPT's compound miter saw offers better material support with its vice clamping system to secure the workpiece. This single-bevel table saw 10 inch is your ticket to fast and precise cuts, perfect for all your professional or DIY projects.
- PORTABLE DESIGN: The compound miter saw from Metabo HPT is lightweight, at only 24.2lbs. Our portable miter saw is easy to maneuver. The thumb-actuated positive stops allow for quick miter adjustments. 10" miter saw blade included
- POWER SAW FOR PRECISE WOODWORKING: this durable woodworking tool is equipped with a 15 Amp motor to deliver high power for the toughest of cuts, generating a no-load speed of up to 5,000 RPM.
- SAFETY FEATURES: This miter saw includes an electric brake that halts the rotation of the blade within seconds. The built-in blade guard protection and horizontal handle ensure safe cutting.
- VERSATILE AND PRECISE CUTS: Our power saw features a 0-52 degree miter angle range to the left and right for increased flexibility. The bevel range is 0-45 degrees to the left with adjustable bevel stops for precision cuts.
Evolution Power Tools RAGE5S 10″ TCT Multi-Material Table Saw, 10
Evolution Power Tools RAGE5S 10" TCT Multi-Material Table Saw, 10
Features
- The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw.
- Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles.
- Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel.
- The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more
- For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch.
Metabo HPT Jobsite Table Saw, 10-Inch Carbide Tipped Blade, 35-Inch Rip Capacity, Fold & Roll Stand, 8 x 13/16-Inch Dado Capacity (C10RJS)
Metabo HPT Jobsite Table Saw, 10-Inch Carbide Tipped Blade, 35-Inch Rip Capacity, Fold & Roll Stand, 8 x 13/16-Inch Dado Capacity (C10RJS)
Features
- BEST IN CLASS RIP CAPACITY: 3" to the right x 22" to the left .Table Material : Aluminum
- OVERSIZED TABLE: 28 3/4" x 22" for easy and safer material support
- PRO LEVEL MOTOR: Cooper wound, soft start, electric brake, overload protection, 15 amp, 4,500 RPM
- DURABLE FOLD AND ROLL STAND: For easy setup and breakdown with an adjustable foot for stabilization on uneven surfaces
- METAL MITER GAUGE: For precise miter cuts
Keter Folding Table Work Bench for Miter Saw Stand, Woodworking Tools and Accessories with Included 12 Inch Wood Clamps – Easy Garage Storage
Keter Folding Table Work Bench for Miter Saw Stand, Woodworking Tools and Accessories with Included 12 Inch Wood Clamps – Easy Garage Storage
$103.00 in stock
2 used from $98.65
Features
- Instant Workspace Anywhere: Ready to work in just 30 seconds with no assembly required, this lightweight worktable is perfect for DIY projects, home improvements, and job sites.
- Robust & Spacious: With a large work surface supporting up to 1,000 lbs. and 12" clamps that can be installed horizontally or vertically, you can tackle heavy-duty tasks with ease and keep your materials secure for any job.
- Versatile Design: Ideal for miter saws, woodworking, and various other tasks, the quick-opening and folding system ensures seamless storage and transport, allowing you to set up and pack up quickly.
- Durable & Weather-Resistant: Constructed from weather-resistant polypropylene and heavy-duty resin with aluminum legs, this workbench won’t rust, peel, or dent for reliable performance in any environment.
- Made For Your Life: For over 75 years, Keter has invented, created, designed, and built products inspired by how people live to make their day-to-day lives better. Innovation has been at the heart of our success, enabling us to design lifestyle solutions for in and around the home in ways only WE can.
Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323
Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323
$137.79 in stock
7 used from $87.57
Features
- [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
- [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
- [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
- [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
- [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)
DEWALT Table Saw Stand, Mobile/Rolling (DWE74911)
$163.80 in stock
4 used from $157.25
Features
- Durable steel construction
- Easy setup and break down with excellent stability
- Designed for easy loading and unloading into and out of vehicle
BOSCH TS2100 Gravity-Rise Table Saw Stand
BOSCH TS2100 Gravity-Rise Table Saw Stand
Features
- 8-Inch treaded wheels - handles rough terrain
- Universally adaptable - mounting holes for competitors' table saws - DeWALT, Makita, Hitachi, Craftsman, Ridgid
- Gravity-Rise stand - Bosch exclusive design for easy table saw setup and table down
- Exceptional portability - quick and easy transport between job sites
- Heavy duty construction - withstands 250 lbs. of downward force
So, These are some of the best table saw under 400 with all the major features that you must be looking for. Now you can easily pick out the best one based on your budget, needs and preferences. Still, if you found yourself confused about choosing the best product, then you can try this DEWALT Table Saw Stand for Jobsite, 10-Inch (DW7451) for more recommendations. Hope you enjoyed reading the article!
